From Mageia wiki
Jump to: navigation, search
m (Various software: #28097 also 64 bit)
(RC->Final)
Line 14: Line 14:
  
 
This page is a companion to [[Mageia_8_Release_Notes|the Release Notes]].
 
This page is a companion to [[Mageia_8_Release_Notes|the Release Notes]].
 
'''This page is currently reflecting ''RC'' release. ''' Entries will only be removed when any new RC, and final ISOs is released.
 
  
 
''' '' Entries below prepended with ''"FIXED"'', have a released update.''' '' So if you experience a problem marked fixed, try to do a full update. Some issues may need logout/login or reboot. Some are installation or upgrade issues.
 
''' '' Entries below prepended with ''"FIXED"'', have a released update.''' '' So if you experience a problem marked fixed, try to do a full update. Some issues may need logout/login or reboot. Some are installation or upgrade issues.
Line 25: Line 23:
 
Also see Release Notes [[Mageia_8_Release_Notes#Known_issues|Known issues]] and [[Mageia_8_Release_Notes#Bug_reporting|Bug reporting]] sections.
 
Also see Release Notes [[Mageia_8_Release_Notes#Known_issues|Known issues]] and [[Mageia_8_Release_Notes#Bug_reporting|Bug reporting]] sections.
  
Note that we will be updating issues from the bugtracker, i.e [https://bugs.mageia.org/buglist.cgi?keywords=8rc1 rc1], [https://bugs.mageia.org/buglist.cgi?keywords=8rc2 rc2], [https://bugs.mageia.org/buglist.cgi?keywords=FOR_ERRATA8 FOR_ERRATA8], [https://bugs.mageia.org/buglist.cgi?keywords=IN_ERRATA8 IN_ERRATA8], [https://bugs.mageia.org/buglist.cgi?keywords=FOR_RELEASENOTES8 FOR_RELEASENOTES8] as they are decided.
+
Note that we will be updating issues from the bugtracker, i.e [https://bugs.mageia.org/buglist.cgi?keywords=FOR_ERRATA8 FOR_ERRATA8], [https://bugs.mageia.org/buglist.cgi?keywords=IN_ERRATA8 IN_ERRATA8], [https://bugs.mageia.org/buglist.cgi?keywords=FOR_RELEASENOTES8 FOR_RELEASENOTES8] as they are decided.
  
 
== Boot ==
 
== Boot ==
Line 54: Line 52:
 
=== AMD/ATI ===
 
=== AMD/ATI ===
  
FIXED {{bug|28154}} - Live media not booting with some Radeon HD GPU or system installed with Classic ISO.
+
FIXED(?) {{bug|28154}} - Live media not booting with some Radeon HD GPU or system installed with Classic ISO.
  
 
For AMD graphic cards based on Southern Islands family (Tahiti, Pitcairn, Oland, Verde, Hainan) and Sea Islands family (Kaveri, Bonaire, Hawaii, Kabini, Mullins) we are now defaulting to the newer amdgpu driver instead of the older radeon, and want feedback if it works properly or not on your hardware.
 
For AMD graphic cards based on Southern Islands family (Tahiti, Pitcairn, Oland, Verde, Hainan) and Sea Islands family (Kaveri, Bonaire, Hawaii, Kabini, Mullins) we are now defaulting to the newer amdgpu driver instead of the older radeon, and want feedback if it works properly or not on your hardware.
Line 97: Line 95:
  
 
{{bug|28299}} - GTK apps complain (in log) about missing window_decorations.css. - [https://bugs.mageia.org/show_bug.cgi?id=28299#c1 Manual fix here]
 
{{bug|28299}} - GTK apps complain (in log) about missing window_decorations.css. - [https://bugs.mageia.org/show_bug.cgi?id=28299#c1 Manual fix here]
 
FIXED {{bug|28311}} - Dolphin 20.12.0 segfault while when opening a new tab while there's text in the search field
 
 
FIXED in next ISO {{bug|28324}} - On systems installed from Live-DVD Plasma, Dolphin segfaults - [https://bugs.mageia.org/show_bug.cgi?id=28324#c21 Manual fix here]
 
  
 
{{bug|28342}} - No shadows on GTK menus in GTK apps under Plasma. - When the theme "Breeze" is set in  {{menu|System Settings}} (icon in panel) {{menu|-> Application Style -> Configure GNOME/GTK Application Style}}, there is no shadow in GTK right-click and GTK menus. Workaround: Set it to "Adwaita" (which is default).
 
{{bug|28342}} - No shadows on GTK menus in GTK apps under Plasma. - When the theme "Breeze" is set in  {{menu|System Settings}} (icon in panel) {{menu|-> Application Style -> Configure GNOME/GTK Application Style}}, there is no shadow in GTK right-click and GTK menus. Workaround: Set it to "Adwaita" (which is default).
Line 109: Line 103:
  
 
'''Network:''' By default, the NetworkManager service is enabled in place of the old network management services. You can use the drop-down menu accessible from the top right corner of the GNOME desktop to perform any necessary network configuration. For wired connections, the network is usually configured automatically, and you don't need to do anything. For wireless networks, you will usually need to select an access point and, if it is password-protected, enter the password. Network configuration via the MCC/drakconnect should also work in most cases.
 
'''Network:''' By default, the NetworkManager service is enabled in place of the old network management services. You can use the drop-down menu accessible from the top right corner of the GNOME desktop to perform any necessary network configuration. For wired connections, the network is usually configured automatically, and you don't need to do anything. For wireless networks, you will usually need to select an access point and, if it is password-protected, enter the password. Network configuration via the MCC/drakconnect should also work in most cases.
 
=== Cinnamon ===
 
 
FIXED {{bug|28129}} (32 bit) '''Nemo''' hangs at start from launcher or terminal.
 
  
 
=== Xfce ===
 
=== Xfce ===
Line 133: Line 123:
  
 
Some help, if needed: 1) Launch {{cmd|picom}} from a terminal and see the output, exit with Ctrl-C.  2) {{file|/etc/xdg/picom.conf}} have comments.
 
Some help, if needed: 1) Launch {{cmd|picom}} from a terminal and see the output, exit with Ctrl-C.  2) {{file|/etc/xdg/picom.conf}} have comments.
 
- - -
 
 
FIXED {{Bug|26144}} - lxqt broken icon theme as installed - ''Manual fix [https://bugs.mageia.org/show_bug.cgi?id=26144#c17 here].''
 
 
=== Mate ===
 
 
FIXED {{Bug|28202}} - Mate: Menu entries empty
 
  
 
== Software ==
 
== Software ==
 
=== Applications that run as root fail to run in grahics mode ===
 
 
'''{{bug|28280}} - Drakxtools fail to launch in GUI mode after configuring network'''
 
 
Mageia Control Center will fail to start in graphics mode if the hostname for the network is left at its default of localhost.
 
The current workarounds are to either specify a hostname other than "localhost" during network setup, or before starting MCC, as your normal user in a terminal enter {{console|xhost +si:localuser:root<br>localuser:root being added to access control list}}
 
A proper fix will be decided on and implemented before the final ISO images are produced.
 
 
This bug has also been shown to affect SDDM in some cases. {{bug|27601}}
 
  
 
=== Mageia Welcome ===
 
=== Mageia Welcome ===
Line 162: Line 134:
 
Plasma Discover and Gnome-software prefer [[Ways_to_install_programs#Flatpak|Flatpak]] [https://bugs.mageia.org/show_bug.cgi?id=27620#c5 over Mageia RPM packages].
 
Plasma Discover and Gnome-software prefer [[Ways_to_install_programs#Flatpak|Flatpak]] [https://bugs.mageia.org/show_bug.cgi?id=27620#c5 over Mageia RPM packages].
  
=== Video ===
+
=== Various software ===
 
 
FIXED {{bug|27377}} - VLC plays audio but not video
 
  
 
{{Bug|28363}} - VLC crashes when opening a MKV file when the video codec is AV1
 
{{Bug|28363}} - VLC crashes when opening a MKV file when the video codec is AV1
 
=== Various software ===
 
  
 
{{Bug|28097}} - xviewer seg fault; also, not in application menus
 
{{Bug|28097}} - xviewer seg fault; also, not in application menus

Revision as of 22:48, 24 February 2021


Drakconf multiflag.png
Other languages
Deutsch ; English  ; Español ; Français ; Português(Portugal)


Notes

This page is a companion to the Release Notes.

Entries below prepended with "FIXED", have a released update. So if you experience a problem marked fixed, try to do a full update. Some issues may need logout/login or reboot. Some are installation or upgrade issues.

Only significant issues with packages contained in the ISOs are listed here. - We have a lot of additional software in repositories.

A non-listed issue you see may be fixed if you do a full update.

Also see Release Notes Known issues and Bug reporting sections.

Note that we will be updating issues from the bugtracker, i.e FOR_ERRATA8, IN_ERRATA8, FOR_RELEASENOTES8 as they are decided.

Boot

Live images

Installer images

Crash at end of install

mga#27838 Some computers have buggy firmwares, causing writes to EFI NVRAM to fail at end of Mageia installation.

Workaround: When configuring the bootloader at end of the install: Select rEFInd instead of GRUB, check "Install in /EFI/BOOT", uncheck the option to store to NVRAM (New for Mageia 8)

NetInstaller

  • On some UEFI machines the NetInstaller ISO boots with a Grub error message: error: ../../grub-core/video/readers/png.c:595 invalid filter value And shows Grub2 menu using text mode instead of graphic. Functionality is not affected; it is just a cosmetic quirk. mga#28225
  • If the source of the Mageia installation is in a USB device formatted with exFAT filesystem you may have to unplug and replug the USB device to get access to the partition. Comment#23 in mga#28371

32-bit installer must be on DVD to work as repository

After system install, the Classic Installer ISOs can be utilized as a repository, to install software from without using internet.

The 64 bit ISO works for this both when placed on DVD and on a USB stick. The 32 bit ISO does not work as a repository from USB.

Graphics

AMD/ATI

FIXED(?) mga#28154 - Live media not booting with some Radeon HD GPU or system installed with Classic ISO.

For AMD graphic cards based on Southern Islands family (Tahiti, Pitcairn, Oland, Verde, Hainan) and Sea Islands family (Kaveri, Bonaire, Hawaii, Kabini, Mullins) we are now defaulting to the newer amdgpu driver instead of the older radeon, and want feedback if it works properly or not on your hardware.

If it does not work for you, you can fall back to the older driver by adding the following on kernel command line:

For Southern Island cards:

radeon.si_support=1 amdgpu.si_support=0

For Sea Islands cards:

radeon.cik_support=1 amdgpu.cik_support=0

Nvidia

Nvidia has neglected to fix security issues in their 340 series driver, so we had to drop it from official repos. See Release Notes.

Desktops

mga#23929 - The folder Desktop in $HOME is not translated with Plasma or MATE only DE installation

mga#28378 - SDDM greeter does not remember previous session. - Manual fix: In /etc/sddm.conf remove the line RememberLastSession=false (or prefix it with #).

Plasma

Wayland session with Nvidia's 455 (current) nonfree-drivers is available by making sure that "nokmsboot" is removed and "nouveau.modeset=0" is passed to Kernel command line. Note mga#27296 - Plasma Wayland session broken, and mga#28365 - Control Center does not start in Plasma Wayland ( temporary fix: as normal user, first issue xhost +si:localuser:root )

Compiz desktop effects is no longer compatible with Plasma. If you use it in Plasma on Mageia 7 then disable it in Mageia Control Center Hardware -> Configure 3D Desktop effects - before upgrade, and if you don't want Compiz for another desktop environment, uninstall it. After install/upgrade of Mageia, you find desktop effects at System Settings (icon in panel) -> Workspace -> Workspace Behavior -> Desktop Effects.

Dolphin right click extension kde-rootactions-servicemenu is removed as it is unmaintained upstream and have issues.

mga#27147 - Multi-users successive logins, plasmashell no longer runs log on to whatever user after going into sleep

mga#27183 - Default Mageia spectacle integration settings missing in plasma5 systemsettings - sometimes...

mga#27362 - startplasma-x11 spawns zombie process (may make it sluggish)

mga#28095 - Avatar Change not working on Classic Install Mageia 8 but does work on Live

mga#28287 - new plasma workspace does not allow unlocking of widgets when upgrading from older version. Plasma5 desktop and panel widgets cannot be locked/unlocked in Plasma version 5.18 onwards. This means that any such widgets locked before the upgrade cannot be unlocked after. So before upgrading, be sure to UNlock all such widgets. If you do find locked widgets after upgrading, this will unlock them: $ qdbus org.kde.plasmashell /PlasmaShell evaluateScript "lockCorona(false)"

mga#28299 - GTK apps complain (in log) about missing window_decorations.css. - Manual fix here

mga#28342 - No shadows on GTK menus in GTK apps under Plasma. - When the theme "Breeze" is set in System Settings (icon in panel) -> Application Style -> Configure GNOME/GTK Application Style, there is no shadow in GTK right-click and GTK menus. Workaround: Set it to "Adwaita" (which is default).

GNOME

Wayland: By default, GNOME uses the Wayland display server. Wayland is still not fully mature, and may not work well on some hardware. Normally GNOME will automatically fall back to using the X.org display server if Wayland fails to start, but in some cases, this fails to happen. If the GNOME desktop fails to launch after completing the initial language and locale selection, or if you experience display problems, you can try forcing GNOME to use the X.org display server by adding nowayland to the boot options in the initial boot menu (press e to edit the boot options).

Network: By default, the NetworkManager service is enabled in place of the old network management services. You can use the drop-down menu accessible from the top right corner of the GNOME desktop to perform any necessary network configuration. For wired connections, the network is usually configured automatically, and you don't need to do anything. For wireless networks, you will usually need to select an access point and, if it is password-protected, enter the password. Network configuration via the MCC/drakconnect should also work in most cases.

Xfce

mga#24134 - After login the display may show black and white bands or interesting effects for a couple of seconds.

mga#27795 - In Xfce, net_applet does not react to changes in connection status properly

LXQt

mga#28360 The compositor for transparency, generally used with Openbox, used to be Template:Pkg. This one is deprecated and replaced by Template:Pkg. If you upgrade from Mageia 7, the configuration file ~/.config/compton.conf can have some incompatible parameters which need to be edited. - Or simply delete that file. Unfortunately we have no Picom configuration tool yet.

Picom looks for configuration in the following order: ~/.config/picom.conf, ~/.config/compton.conf, /etc/xdg/picom.conf. That means a customized picom.conf can reside in ~/.config/ for a personal configuration or in /etc/xdg/ for a system wide configuration. So for customisation per user copy /etc/xdg/picom.conf to ~/.config/ and edit it there.

If you instead want to use compton-conf configuration similar to Mageia 7, install the compton-conf rpm and then copy /usr/share/compton-conf/compton.conf.example and edit it like below.

How to edit compton settings to picom compatible: Rename ~/.config/compton.conf to picom.conf, and in it disable the lines starting with: no_dnd_shadow, no_dock_shadow, clear shadow, menu_opacity, alpha_step, paint-on-overlay by prepending them with a #. Make the line starting with vsync read vsync = false; , and replace the whole line starting with glx-swap-method with use-damage = true; .

To start Picom: Mageia -> Accessories -> picom. To have Picom automatically start at login: LXQt configuration center -> LXQt settings -> Session Settings -> Autostart -> Add Name: Picom, Command: picom.

Some help, if needed: 1) Launch picom from a terminal and see the output, exit with Ctrl-C. 2) /etc/xdg/picom.conf have comments.

Software

Mageia Welcome

mga#28328 - Steam cannot be installed with the one-click button proposed with Mageia Welcome if 32bits repositories are not enabled, as it is the case by default. - 32 bit repositories should be enabled to complete the installation.

Flatpak

Plasma Discover and Gnome-software prefer Flatpak over Mageia RPM packages.

Various software

mga#28363 - VLC crashes when opening a MKV file when the video codec is AV1

mga#28097 - xviewer seg fault; also, not in application menus

Miscellaneous

Printing

Printer duplicate - not a bug

You may see your printer shown twice. That is because you are shown all available printers on both the local CUPS server (localhost) and all connected CUPS servers. So if you share a printer to the network, which is the default, it will be shown as two on the sharing computer. This behaviour is not specific to Mageia.

Workaround: Tell CUPS to not share the printer queue job on local network if you do not need to use it from another computer. See Mageia Control Center Section Hardware > Printing menu Server -> Settings.

Upgrade issues

Be sure to follow one of the procedures in Release Notes. Avoid screen saver interfering! mga#25251

Upgrade using DNF

Extra kernel flavour installed - DNF uses a different method to select kernel flavour than Mageia installer. This may result in that a system that was using the desktop kernel, after upgrade have both desktop and server installed, and server used. Easy fix: select at boot the desktop kernel, then uninstall server kernel. mga#28272

Removed packages

Generally, see at end of Release Notes.

VirtualBox

There is no longer a VirtualBox 32 bit host.

Various upgrade issues

Samba

mga#28042 - Upgrade to MGA8 Fails - ERROR:'script' failed for samba-client-4.10.18-1.1mga7.x86_64